Speedy™ Human BCMA/TNFRSF17 One-Step ELISA Kit
Cat no : SE50071
Synonyms
TNFRSF17, B-cell maturation protein, BCM, BCMA, CD269
Validation Data Gallery
Product Information
| Product name | Speedy™ Human BCMA/TNFRSF17 One-Step ELISA Kit |
| Tests | 1 X 96 well plate |
| Sample type | Serum, Plasma, Urine, Saliva |
| Assay type | Sandwich |
| Sensitivity | 1.3 pg/mL |
| Range | 31.25-2000 pg/mL |
| Reactivity | Human |
| Tested applications | Sandwich ELISA |
| Gene ID (NCBI) | 608 |
Recovery
| Sample Type | Average | Range |
|---|---|---|
| Human plasma | 108% | 104%-115% |
| Urine | 117% | 114%-119% |
| Saliva | 94% | 91%-96% |
IntraAssay
| Sample | n | mean ( pg/mL) | SD | CV% |
|---|---|---|---|---|
| 1 | 8 | 1,041.9 | 35.3 | 3.4 |
| 2 | 8 | 250.1 | 2.6 | 1.0 |
| 3 | 8 | 126.2 | 1.8 | 1.4 |
InterAssay
| Sample | n | mean ( pg/mL) | SD | CV% |
|---|---|---|---|---|
| 1 | 16 | 1,035.2 | 35.6 | 3.4 |
| 2 | 16 | 252.3 | 4.5 | 1.8 |
| 3 | 16 | 126.5 | 2.2 | 1.7 |
Background Information
BCMA (B cell maturation antigen), also known as TNFRSF17, is a type III transmembrane glycoprotein and is a member of the TNF-receptor superfamily. This receptor is preferentially expressed in mature B lymphocytes and plasma cells, which may be important for B cell development and autoimmune response. BCMA has two agonist ligands: a proliferation-inducing ligand (APRIL) and BAFF. When BCMA binds to APRIL, it transmits signals of cell survival and proliferation; when BCMA binds to BAFF, it mediates the activation of NF-kappaB and MAPK8/JNK. It has been found that the overexpression and activation of BCMA are associated with multiple myeloma (MM) in preclinical models and humans, supporting its potential utility as a therapeutic target for MM.
Properties
| Storage Instructions | All the reagents are stored at 2-8℃ for 6 months or -20℃ for 12 months. Refer to the protocol for further storage instructions. |
| Synonyms | TNFRSF17, B-cell maturation protein, BCM, BCMA, CD269 |
FAQ
1、I have limited sample diluent. How should I handle samples requiring high dilution factors?
Answer: We recommend performing a serial dilution. For example, if human serum requires a 1,000,000-fold dilution, you can use a three-step 100× dilution method as follows:
Step 1: Take 2 uL of human serum and add it to 198 uL of sample diluent, mix thoroughly to obtain a 100-fold diluted sample.
Step 2: Take 2 uL of the 100-fold diluted sample and add it to 198 uL of sample diluent, mix thoroughly to obtain a 10,000-fold diluted sample.
Step 3: Take 2 uL of the 10,000-fold diluted sample and add it to 198 uL of sample diluent, mix thoroughly to obtain a 1,000,000-fold diluted sample.
If further dilution is required, additional serial steps can be used. We do not recommend using any other solutions or water for dilution, except for the sample diluent we suggest. If your sample diluent is still insufficient, please contact our customer service for more sample diluent.
2、If thermostatic shaker is not available, will it affect the duration of my experiment and the experimental data?
Answer: If thermostatic shaker is not available, it may take 2.5 hours to complete this experiment. After adding the antibody cocktail, we suggest you incubate the plate at 37℃ for 2 hours. After adding TMB, you only need to incubate the plate at 37℃ for 15 minutes. Through comparative experiments, our R&D personnel have confirmed that you can still obtain valid experimental data, although the signal will be slightly reduced.